Table of Contents
Advertisement
1
2
3
1. MENU button ............................ This button is used to pop-up, select and close the OSD (On Screen
2.
button ................................... This button is used to select menu options when the OSD Menu is
3.
buttons ............................. When the OSD Menu is displayed:
4. AUTO button ............................ When the OSD Menu is displayed:
5. Power LED ............................... This LED is lit green when in use and orange when in power-saving
6. Power button ............................ Pressing this button turns the power on. (After turning the power on, it
7. Power terminal ......................... The AC adapter is connected here.
8. Analog signal cable ................. Connects to the computer's analog RGB output terminal.
9. Security lock anchor ................ By connecting a security lock (commercially available) to the security
10. Ventilation openings ................ Note: Never block the ventilation openings as this may lead to
Product description
4
5
6
Display) Menu.
displayed.
These buttons are used to increase or decrease the value of a
selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness.
This button is used to turn off the OSD Menu.
When the OSD Menu is not displayed:
This button is used to perform automatic adjustment of the screen
(CLOCK, PHASE, H-POS and V-POS).
mode.
may take a little time before the screen displays.)
Press the button again to turn the power off.
lock anchor, the monitor is fixed so that it cannot be transported.
The security slot works in conjunction with Kensington Micro Saver
Security Systems.
overheating inside the monitor and result in malfunction.
7
5
10
9
8
Advertisement
Table of Contents
