Line/Mic Lch; Phantom Rch; Ref(Xlr/Rca); Input Trim Lch - Denon DN-700R Owner's Manual

Setting Items Setting details (Items in bold are factory default)

08 Line/Mic Lch

Line: Sets to line input.
Sets the mode of the XLR Mic: Sets to microphone input.
left channel.
Line: Sets to line input.
09 Line/Mic Rch
Sets the mode of the XLR Mic: Sets to microphone input.
right channel.
z1
10 Phantom Lch Off: Turns phantom power off for the left channel.
Sets phantom power (+48V) On: Turns phantom power on for the left channel. However, when "08
Line/Mic Lch" is set to "Line", turn phantom power off.
for "08 Line/Mic Lch".
z1
Off: Turns phantom power off for the right channel.

11 Phantom Rch

On: Turns phantom power on for the right channel. However, when "08
Sets phantom power (+48V)
for "09 Line/Mic Rch". Line/Mic Rch" is set to "Line", turn phantom power off.
12 Mic In Sens Lch -16dBu – -40dBu – -60dBu
Adjusts the XLR
microphone sensitivity for
the left channel in 0.1dBu
When adjusting it, the sound is output to the output terminal.
increments.
-16dBu – -40dBu – -60dBu
13 Mic In Sens Rch
Adjusts the XLR microphone
sensitivity for the right
channel in 0.1dBu
When adjusting it, the sound is output to the output terminal.
increments.
14 Volume Input Fixed (0dB): Fixed at 0dB.
Sets the analog recording Variable: Mute can be adjusted from -60 – 0 – 10dBu in 0.1dB increments.
input level.
15 Ref (XLR/RCA) +24dBu/+10dBV: XLR=+24dBu / RCA=+10dBV
Sets the input/output +20dBu/+6dBV: XLR=+20dBu / RCA=+6dBV
standard level. +18dBu/+4dBV: XLR=+18dBu / RCA=+4dBV

16 Input Trim Lch

+2.0dB – 0dB – -2.0dB
Adjusts the analog input for
the left channel in 0.1dB
increments.
When adjusting it, the sound is output to the output terminal.

17 Input Trim Rch

+2.0dB – 0dB – -2.0dB
Adjusts the analog input for
the right channel in 0.1dB
increments.
When adjusting it, the sound is output to the output terminal.

18 Output Trim Lch

+2.0dB – 0dB – -2.0dB
Adjusts the analog output
for the left channel in 0.1dB
increments.
+2.0dB – 0dB – -2.0dB

19 Output Trim Rch

Adjusts the analog output
for the right channel in
0.1dB increments.
Setting Items

20 Time Form

12h: Switches to the 12-hour display (AM/PM).
Sets the type of the current 24h: Switches to the 24-hour display.
time display.
MDY: Displays the date in Month/Day/Year order.

21 Date Form

Sets the display order of the DMY: Displays the date in Day/Month/Year order.
date. YMD: Displays the date in Year/Month/Day order.

22 Display Contrast

1 – 5 : 1 is the darkest, 5 is the brightest.
Sets the contrast of the
display.
z2

23 Language

Eng: Displays the file names and folder names in English.
Selects the display language Jpn: Displays the file names and folder names in Japanese.
for the file names and folder
names.

24 Serial Bit Rate

9600: 9600 bps
Sets the serial 38400: 38400 bps
communication bitrate for
RS-232C.
z2

25 Machine Name

DN-700R
Displays the UPnP device
name. (maximum 12
characters)
z2

26 IP Address

Auto: DHCP is assigned automatically.
Static: Specify a fixed IP address. When selected, the fixed address is
displayed.
z2
Subnet Mask None: Not displayed when the "IP Address" is set to "Auto". Can be set
for any setting other than "Auto".
Static: 0.0.0.0 to 255.255.255.255
(When "Auto" is set: 255.255.255.0)
z2
Gateway None: Not displayed when the "IP Address" is set to "Auto". Can be set
for any setting other than "Auto".
Static: 0.0.0.0 to 255.255.255.255
(When "Auto" is set: 0.0.0.0)
z2
DNS Server None: Not displayed when the "IP Address" is set to "Auto". Can be set
for any setting other than "Auto".
Static: 0.0.0.0 to 255.255.255.255
(When "Auto" is set: 0.0.0.0)
z1 Settings are saved, and it takes approximately 8 seconds to switch the circuits in order to enable the
settings. During this time "Saving" is displayed.
z2 The DN-700R will automatically reboot (power off and then back on) to enable the settings.
22
Setting details (Items in bold are factory default)
Setting defaults