NEC Express5800/120Rf-2 User Manual page 32

Feature Description
Control access to To control access to using the system, set a user password and enable it
the system other through Setup.
than BIOS Setup:
To disable a password, change it to a blank entry or press CTRL-D in the
set user password
Change Password menu of the User Password Option menu found in the
Security Subsystem Group.
To clear the password if you cannot access Setup, change the Clear
Password jumper (see Chapter 4).
Boot without The system can boot with or without a keyboard. During POST, before the
keyboard system completes the boot sequence, the BIOS automatically detects and
tests the keyboard if it is present and displays a message.
Specify the boot The sequence that you specify in setup will determine the boot order. If
sequence secure mode is enabled (a user password is set), then you will be
prompted for a password before the server fully boots. If secure mode is
enabled and the "Secure Boot Mode" option is also enabled, the server
will fully boot but will require a password before accepting any keyboard
or mouse input.
1-16 System Overview