NEC Express5800 series User Manual page 49

Step 5
Click on [OK] in the confirmation screen.
The new configuration is saved in the controller.
Step 6
Click on [OK] in the confirmation screen.
Initializes the logical drive.
NOTE: If you canceled, select the logical drive on [Logical
Devices View] in main menu, select [Initialize] in [Logical
Drv] menu to initialize the drive.
Changing Array Configuration
To change array configuration, select an icon of logical drive to be changed in [Logical Devices
View], and click [Reclaim]. Click on [OK] in the confirmation screen. After that, repeat from Step
2. If no logical drives are defined in the array (Step 3 or earlier), click on [Back] to display the
Array Definition screen and begin the configuration process again.
Adding a Physical Drive to an Existing Array
You cannot add a physical drive to an array while running the Configuration Wizard.
NOTE: To add a physical drive to an existing array, see
Section 5.4.
– –
46