NEC Express5800 series User Manual page 40

Express5800 series

Hide thumbs Also See for Express5800 series:

Table of Contents

Logical Drv Menu

Initialize

Choose this option to initialize the selected logical drive or drives. You can view the

progress of initialization. The time required for initialization depends on type and capacity

of physical drive.

IMPORTANT: Power Console Plus allows you to initialize a

drive at any time. Make sure that the drive being initialized

does not have live data. All data will be lost.

Check Consistency

Choose this option to verify the redundancy data in logical drives that use RAID levels 1

or 5.

Select the logical drive to be checked and choose [Check Consistency] from the [Logical

Drv] menu.

You are prompted to run parity checking. Click on [OK] to perform parity checking.

Parity Checking Selected Device(s)

If a discrepancy is found, it is automatically corrected. However, if the failure is a read

error on a data drive, the bad data block is reassigned with the generated data.

–

Table of Contents

Power console plus