NEC Express5800 series User Manual page 36

Alarm Control
The alarm generates a beeping sound when one or more physical disks fail. The sound
continues until Silence Alarm is selected. After a rebuild finishes, a beep signals that the
rebuild is done. Choose Silence Alarm at this time to silence the alarm. The alarm settings
are:
Setting
Enable / Disable
Alarm
Silence Alarm
Fast Initialization
Specify whether to perform fast initialization. Always set to "Enable" (default).
Battery Status
The battery information on a controller is displayed.
S.M.A.R.T. Setting
S.M.A.R.T. Set up a function. Please do not change.
Description
When Alarm Control option is selected and if Disable Alarm
appears, the alarm is enabled and can be disabled. If Enable Alarm
appears, the alarm is disabled and can be enabled. When Enable
Alarm is set, a beeping sound occurs even when all logical drives
are online and there are no failed disks after a hot spare rebuild
completes. Use the Silence Alarm function to stop the alarm.
Stops the alarm if it is currently beeping. If the alarm is not beeping,
it has no effect.
– –
33