The main displays
To show a display, press DISPLAY, press
or
to select the type of display to show (Chart,
Sonar or Other), press
to select the display from the list, then press ENTER.
or
To return to the chart display, press ESC.
4
Dual displays
The TRACKFISH can show two displays at once, for example Chart + sonar or Sonar + highway. When two displays
are shown at once, only one of the displays, called the active display, is controlled by the user. For example:
If Chart is the active window, then pressing MENU will display the options for Chart.
If Sonar is the active window, then pressing MENU will display the options for Sonar.
The active display has a yellow border.
To change the active display, press DISPLAY twice:
For example, if Chart + sonar is shown:
If Chart is the active window, then press DISPLAY twice to make Sonar the active display.
If Sonar is the active window, then press DISPLAY twice to make Chart the active display.
Setup menu and options
Factory default settings are shown where
applicable. Press MENU one or more times,
to show the Setup menu, then select
a particular option
using the
or
cursor keys.
DISPLAY X2
Favourite displays
The TRACKFISH has a list of commonly used displays, called
favourite displays. There can be up to six favourite displays
and three can be selected by the user.
To change the display to the next favourite, press PAGE.
For example:
Chart
SmartCraft
(See the SmartCraft
PAGE
Gateway Installation
and Operation Manual)
Chart +
Sonar
Press MENU once or more until the Setup menu is displayed,
then select Favourites. The favourites are used by the
PAGES key (see section 2-6-2).
The fi rst three favourites are preset to Chart, Sonar and Chart +
sonar, and can not be altered. To select a display for Favourite
4, 5 or 6:
1
Select the favourite to set.
2
A list of choices is displayed. Select one.
DISPLAY X2
PAGE
Sonar
PAGE