Ricoh Type 2075 Operating Instructions Manual page 39

Note
❒ If no settings on the [Recovery/Parallel Printing] tab are available, follow
the procedure below.
A Click [Cancel] to close the [Port Configuration:] dialog box.
B Start SmartDeviceMonitor for Client, and then right-click the Smart-
DeviceMonitor for Client icon on the taskbar.
C Click [Extended Features Settings], and then select the [Set Recovery/Par-
allel Printing for each port] check box.
D Click [OK] to close the [Extended Features Settings] dialog box
• User, proxy, and timeout settings can be configured for IPP.
Reference
For information about these settings, see "Using SmartDeviceMonitor for
Client", Network Guide, or SmartDeviceMonitor for Client Help.
Using the SmartDeviceMonitor for Client Port
2
33