Configure Big - LaCie Biggest S2S User Manual

LaCie Biggest S2S
User Manual

4.4.1.4. Configure Big

The Basic Configuration Mode implements the Big
storage policy by concatenating all the hard disk drives
into a single volume. Before reconfiguring the Biggest
S2S, delete previously defined partitions. See 4.4.3.
tition Configured
To create a Big volume
1. To open the Configuration Mode, select Configure
Box in the Edit menu or the corresponding button in
the Status window.
2. Select the Big radio button from the Configuration
Mode frame.
3. A confirmation box appears. Because the Basic Con-
figuration Mode affects all hard disk drives, a con-
figuration change may result in total data loss. Click
Yes to complete the configuration.
4. Select Save to Config File from the File menu or
click the button in the toolbar to save the configura-
tion.
5. Click OK to build the configuration and close Con-
figuration Mode window. This configures the drives
using the Big storage policy. Within a minute, the
Status window will reflect the implemented Big
storage policy configuration.
6. Partition the configured volume to complete the im-
plementation. See 4.4.3.
ume, for details.
Volume, for details.
Partition Configured Vol-
Par-
TeChNICAl NOTe:
the Storage Policy frame lists the volume label,
implemented storage policy and size.
Using Your Biggest S2S
page 
The volumes table below