Sending Images To A Printer For Printing; Connecting The Camera To A Printer; Printing One Image - Ricoh Caplio 400G wide Operation Manual

Sending Images to a Printer for Printing

You can send images from the camera to a PictBridge compliant printer to print them. Images are sent
from the internal memory when no SD memory card is loaded or from an SD memory card when one is
installed.
The following three kinds of direct printing are supported:

• Printing one image

• Printing all images from the camera
• Printing several selected images
Do not disconnect the USB cable during printing.
If a printer error message appears during transmission, check the condition of the printer, and take the appropriate action.
Connecting the Camera to a
Printer
Connect your camera to a printer using the
USB cable provided.
Check that the camera power is off.
Check that the printer power is off.
Load paper into the printer and check that the printer
is ready to print.
Connect one end of the USB cable pro-
vided to the USB port of your printer.
Connect the other end of the USB cable to
the USB terminal on your camera.
The camera power automatically turns on.
Turn the printer power on.
To disconnect the camera from the printer, check that the
power of both units is off before disconnecting the USB
cable between them.
Printing One Image
Check that the printer is ready for print-
ing.
The "Connecting" screen appears.
Press the ADJ. button.
The "Connecting" screen appears. When the connec-
tion between the printer and the camera is estab-
lished, the Direct Print playback mode screen
appears.
For some printers, the "Connecting" screen automati-
cally appears before you press the ADJ. button.
The LCD monitor displays the last image you shot.
Press the #$ #$ buttons to select an image
#$ #$
for printing.
106
Chapter 1 Section 5 Direct Printing