Table of Contents
Advertisement
Inserting an SD Memory Card (Available in Stores)
You can record the still images and movies you have taken in the camera's internal memory or on an SD
memory card (available in stores).
Protecting your images from being deleted
If you move the SD memory card's write-protection switch to LOCK, your still images cannot be accidentally
erased, and the memory card cannot be formatted. If you return the switch to the former position, it is once
again possible to erase images and format the card. It is recommended to switch to LOCK after recording
important images.
Note that you cannot shoot images in the LOCK state because no data can be recorded on the card. Unlock
the card when shooting.
The internal memory capacity is 8MB.
For the number of images that can be stored on an SD memory card, see P.214.
Where images are recorded
When no SD memory card is inserted, the camera records images in the internal memory; when an SD memory card is inserted, it
records images on the memory card.
When no memory card is loaded
• When an SD memory card is loaded, no data is recorded in the internal memory even after the SD memory card becomes full.
• Take care not to get any dirt on the SD Memory Card's metal parts.
Records to internal memory
Chapter 1 Section 1 Getting Started
When a memory card is loaded
18
Records to the SD memory card
Advertisement
Table of Contents
