Using The Full Size Power Nozzle - Riccar Pristine Owner's Manual

Turning On the Power Nozzle
The power nozzle can only be turned on if
the canister is also turned on (canister on /
off switch is located on the main body). The
power nozzle on / off switch is located on the
handle. Simply press the switch forward to
engage the power nozzle.
Using the Power Nozzle
After turning on the canister and power
nozzle, lower the wand by pressing the left
pedal on the back side of the power nozzle.
Removing and Inserting the Wand
Removing the wand from the power nozzle
allows you to use cleaning tools for baseboard
or ceiling cleaning. To do this, first turn the
power nozzle and canister off. Then, press
the wand release collar pictured below and
pull the wand out.
To reinsert the wand into the power nozzle,
simply press the wand back into the neck of
the power nozzle. The wand will then "click"
into place.

Using the Full Size Power Nozzle

Carpet Height Adjustment
Your power nozzle has six different settings
to clean a variety of carpet types and floor
surfaces. To adjust the carpet height setting
of the power nozzle, press the right pedal
located on the back of the power nozzle.
Each press of this pedal will adjust the height
to the next carpet height position.
To determine which setting you are currently
on, look through the height indicator window
on the top of the unit. You will see one of the
six settings detailed below:
Setting:
. XHI Very plush carpet
2. HI Plush carpet
3. Auto General carpet thickness
or bare floors
4. MED Medium pile carpet
5. LO Low pile carpet
6. XLO Indoor/Outdoor carpet
9
Intended Use: