Disarming The Vrs - Python 660XP Owner's Manual

Python car security owners guide
Hide thumbs Also See for 660XP:
Table of Contents

Advertisement

Fifteen seconds
change to a continuous blast.
From this point on, when the ignition key is turned off, the VRS
will immediately turn on the starter kill. This will prevent the
vehicle from being restarted, thus immobilizing it at that spot.
Three minutes
parking lights and the siren will stop. The starter kill will remain
active until the system is disarmed. If the door is opened or the
ignition is turned off and on in an attempt to restart the car, the
siren and light flashing will begin again.

disarming the vrs

Take the time to familiarize yourself with the VRS
quence and the disarm procedure. It is important to recognize
and identify the VRS
it in case of accidental activation.
Once the VRS
must disarm it the next time you operate the vehicle. You must
disarm it with one of the following procedures:
If the system has not entered the triggered sequence (siren has
not started chirping):
© 2002 directed electronics, inc.
after the siren chirps begin, the siren's output will
after the constant siren output begins, the flashing
®
trigger sequence and know how to disarm
®
is armed, it does not disarm automatically. You
®
1. Turn the ignition on.
2. Press
on the transmitter for one second.
The lights will flash and the siren will chirp
twice.
®
triggering se-
®
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents