Disarming The Vrs - Python 650ESP Owner's Manual

Python car security owners guide
Hide thumbs Also See for 650ESP:
Table of Contents

Advertisement

From this point on, when the ignition key is turned off, the VRS
will immediately turn on the starter kill. This will prevent the
vehicle from being restarted, thus immobilizing it at that spot.
Three minutes after the constant siren output begins, the flashing
parking lights and the siren will stop. The starter kill will remain
active until the system is disarmed. If the door is opened or the
ignition is turned off and on in an attempt to restart the car, the
siren and light flashing will begin again.

Disarming the VRS

®
Take the time to familiarize yourself with the VRS
quence and the disarm procedure. It is important to recognize and
identify the VRS
®
trigger sequence and know how to disarm it in
case of accidental activation.
Once the VRS
®
is armed, it does not disarm automatically. You must
disarm it the next time you operate the vehicle. You must disarm
it with one of the following procedures:
If the system has not entered the triggered sequence (siren has
not started chirping):
1. Turn the ignition on.
2. Press the disarm button on the transmit-
26
ter for one second. The lights will flash
and the siren will chirp twice.
1999 Directed Electronics, Inc.
©
®
®
triggering se-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents