Disarming The Vrs - Python 702 Owner's Manual

Python state - of - the - art vehicle security system owner's guide 702

Table of Contents

Three minutes

parking lights and the siren will stop. The starter kill will remain

active until the system is disarmed. If the door is opened or the

ignition is turned off and on in an attempt to restart the car, the

siren and light flashing will begin again.

➜

disarming the vrs

Take the time to familiarize yourself with the VRS

quence and the disarm procedure. It is important to recognize

and identify the VRS

it in case of accidental activation.

Once the VRS

must disarm it the next time you operate the vehicle. You must

disarm it with one of the following procedures:

If the system has not entered the triggered sequence (siren has

not started chirping):

If the system has entered the triggered sequence (siren has begun

chirping), pressing the disarm button of the transmitter will not

disarm VRS

after the constant siren output begins, the flashing

trigger sequence and know how to disarm

is armed, it does not disarm automatically. You

1. Turn the ignition on.

2. Press

on the transmitter for one second. The

lights will flash and the siren will chirp twice.

. To disarm the VRS

during a VRS

trigger sequence:

triggering se-

Table of Contents