Qualified Service Personnel - Frymaster SinBaD Series Operator's Manual

Mcdonald’s sinbad series single basket dispenser
Table of Contents

Advertisement

The McDonald's Single Basket Dispenser (
consistent weight into standard fryer baskets.
A
unit consists of
SinBaD
a hopper which holds up to 39 lbs./17.5 kg of fries
a dispensing chute into which the specified weight of fries for one basket is loaded
a computer and an operator control panel for controlling operation
a proximity switch which releases the fries into the basket when the basket is inserted beneath the
dispensing chute
a sight-glass for monitoring the level of french fries in the hopper.
Additionally, the unit is equipped with casters. The front casters are equipped with locking mechanisms to
secure the units in place.
The
SinBaD
Batch Weight Selectors have been factory-programmed to dispense batches of three standard
sizes: 0.5 lb./.23 kg, 1.0 lb./.45 kg, or 1.5 lb./.68 kg.
1.4
Installation, Operating, and Service Personnel
Operating information for Frymaster equipment has been prepared for use by qualified and/or authorized
personnel only, as defined in Section 1.5.
All installation and service on Frymaster equipment must be performed by qualified, certified, licensed,
and/or authorized installation or service personnel, as defined in Section 1.5.
1.5
Definitions
QUALIFIED AND/OR AUTHORIZED OPERATING PERSONNEL
Qualified/authorized operating personnel are those who have carefully read the information in this manual
and have familiarized themselves with the equipment functions, or who have had previous experience with
the operation of the equipment covered in this manual.
QUALIFIED INSTALLATION PERSONNEL
Qualified installation personnel are individuals, firms, corporations, or companies which, either in person or
through a representative, are engaged in and are responsible for the installation of commercial electric
appliances. Qualified personnel must be experienced in such work, be familiar with all electrical precautions
involved, and have complied with all requirements of applicable national and local codes.

QUALIFIED SERVICE PERSONNEL

Qualified service personnel are those that are familiar with Frymaster equipment and who have been
authorized by Frymaster to perform service on its equipment. All authorized service personnel are required to
be equipped with a complete set of service and parts manuals, and to stock a minimum amount of parts for
Frymaster equipment.
A list of Factory Authorized Service Centers (FASCs) is included with your unit when shipped from the
factory. Failure to use qualified service personnel will void the warranty on your equipment.
) is designed to dispense french fries in batches of
SinBaD
1-2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcdonald’s sinbad series

Table of Contents