Power Acoustik REACT1-1100 Owner's Manual

Power Acoustik REACT1-1100 Owner's Manual

Power acoustik car amplifier owner's manual

Advertisement

Quick Links

65-C5009-MA
Model No.:
Owner's Manual
SRX-D0504; SRX-D1501; SRX-D2501; SRX-D4001
INTRODUCTION
Amplifiers provide high-performance sound reinforcement for your mobile audio equipment.
It s versatility enables compatibility with optional Equalizers, Frequency Dividing Network
Crossovers, and other audio processors in a customized system. The Multi-Mode bridging
Capabilities allow flexibility in hosting several different speaker configurations.
To achieve optimum performance, it is highly recommended that you read this Owner's
Manual before beginning installation.
FEATURES
PWM Power Supply
3 Stage Protection Circuit
SMD Technology
MIL-Spec Fiberglass Circuit Board
True Digital Switching
High Rail Voltage
2 Ohm Stable
Compact Chassis
Full MOSFET Circuitry
High Level Input
Line Output
Bass Boost @45Hz +6 dB or +12 dB(Sub woofer Amplifier)
18 dB Crossover Centered at 80 Hz(Sub woofer Amplifier)
Selectable HPF/LPF @ 80Hz crossover(Full Rang e Amplifier)
WARNING
High powered audio systems in a vehicle are capable of generating Live Concert high
levels of sound pressure, Continual exposure to excessively high volume sound levels may
cause hearing loss or damage. Also, operation of a motor vehicle while listening to audio
equipments at high volume levels may impair your ability to hear external sounds such as;
horns, warning signals, or emergency vehicles, thus constituting to a potential traffic hazard.
In the interest of safety, Consumer Electronics recommends listening at lower volume levels
While driving.
2
:A3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the REACT1-1100 and is the answer not in the manual?

Questions and answers

Summary of Contents for Power Acoustik REACT1-1100

  • Page 1 :A3 65-C5009-MA Model No.: SRX-D0504; SRX-D1501; SRX-D2501; SRX-D4001 INTRODUCTION Amplifiers provide high-performance sound reinforcement for your mobile audio equipment. It s versatility enables compatibility with optional Equalizers, Frequency Dividing Network Crossovers, and other audio processors in a customized system. The Multi-Mode bridging Capabilities allow flexibility in hosting several different speaker configurations.
  • Page 2 TABLE OF CONTENTS PLANNING YOUR SYSTEM Before beginning the installation, consider the following: a. If you plan to expand your system by adding other components sometime in the future, ensure adequate space is left, and cooling requirements are met. PLANNING YOUR SYSTEM ..........b.
  • Page 3 4/8 GAUGE (Or thicker if planning for additional Amplifiers) wire is recommended for both the power and ground wires. 12 Gauge, for the remote turn wire. Both types are REACT1-700/REACT1-1100/REACT1-1800 available at most Mobile Audio Dealers or Installation Shops. (1)GROUND: To Vehicle Chassis...
  • Page 4 Input Sensitivity Control POWER INDICATOR LED REACT1-700/REACT1-1100/REACT1-1800 This METER LAMP will illuminate when the amplifier is turned “ON” . If it fails to illuminate, check the power connections to the Amplifier and fuses.
  • Page 5 SINGLE MONO MODE COMPONENT VALUES FOR 6dB PASSIVE CROSSOVER FREQUENCY INDUCTOR CAPACITOR 80Hz 7.5mH 470uF SPEAKER FUSES 100Hz 6.5mH 330uF 5.5mH 120Hz 330uF 150Hz 220uF REACT4-900 SUB WOOFER 2-8 Ohm A 4 CHANNEL MODE (C)TRI MODE 2-8 Ohm 2-8 Ohm TRI MODE OPEATIONAL OUTPUT allows a Crossover (Subwoofer) to be operated in MONO mode while the main speaker is playing in stereo.
  • Page 6 LED illuminated? SPECIFICATIONS No power to power wire Repair power wire or connections. No power to remote MODEL NO REACT4-900 REACT1-700 REACT1-1100 REACT1-1800 AMP NOT Check connections to radio. wire with receiver on SWITCHING Fuse broken Check fuse MAX Power...

This manual is also suitable for:

React1-1800React1-700React4-900

Table of Contents