JBL CSB6 Owner's Manual page 8

Jbl cinema sound owner's manual
Table of Contents

Advertisement

8
SpEAkER CONNECtIONS
DOLBy
DIgItAL OR DtS
(OR OthER DIgItAL SURROUND MODE) CONNECtION
®
®
Use this installation method for Dolby Digital, DTS or other digital surround processors:
Use the line-level input jack marked "LFE" for the Low-Frequency Effects channel. Connect this jack to the LFE output
or subwoofer output on your receiver or amplifier. Connect each speaker to the corresponding speaker terminals on
your receiver or amplifier.
Make sure that you have configured your surround-sound processor for "Subwoofer On." Also, configure your receiver
for 5.1-, 6.1- or 7.1-channel operation as appropriate. The front left, front right, center and back speakers should
all be set to "Small." If your receiver allows you to set the crossover frequency between the subwoofer and the main
speakers, select 100Hz or the setting that is the closest frequency below it.
DOLBY PRO LOGIC
(NON-DIGITAL) – LINE LEVEL
®
Use this installation method for Dolby Pro Logic
where the receiver/processor is equipped with a subwoofer output or a volume-controlled preamp (line-) level output:
Surround Left
Use RCA-type cables to connect the line-level subwoofer outputs on your receiver or amplifier to the line-level inputs
on the subwoofer. IMPORTANT: Do not use the LFE input on the subwoofer with Dolby Pro Logic processors.
NOTE: If your receiver or amplifier has only one subwoofer output jack, then you will need to use a Y-connector (not
included). Plug the male end of the Y-connector into your receiver or amplifier's subwoofer output jack, and connect
each of the two female ends to separate RCA-type interconnects. Finally, plug the RCA-type interconnects into the
line-level inputs on the subwoofer.
Connect each speaker to the corresponding speaker terminals on your receiver or amplifier. Make sure your receiver or
processor is correctly configured to indicate that the subwoofer is "On."
RECEIVER
SUBWOOFER
LINE
LFE
LFE OUT
LEVEL
IN
applications (not Dolby Digital, DTS or other digital processing),
®
Front Left
Center
+
+
Subwoofer
Line
Level In
L
R
Receiver
Subwoofer
Front
Out
Left
R
L
+
+
Center
Surround
Surround Back
Surround Back
Left
Left
Right
+
+
Surround Back
Surround Back
Left
Right
+
+
L
R
Front Right
+
Front
Right
+
Surround
Right
+
+
Surround Right
+
+

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Csc56Css11Cst56

Table of Contents