REMOTE CONTROL FUNCTIONS PLACING THE JBL CINEMA SB250 OPERATION TURNING THE JBL CINEMA SB250 ON AND OFF OPERATING THROUGH BLUETOOTH ® ADJUSTING THE SYSTEM VOLUME SURROUND MODE BUTTON PROGRAMMING JBL CINEMA SB250 TO RESPOND TO YOUR TV REMOTE TROUBLESHOOTING SPECIFICATIONS...
JBL CINEMA SB250 Optical cable Introduction Thank you for choosing this JBL product. The JBL CINEMA SB250 powered soundbar speaker system is a complete, integrated sound system that will create an extraordinarily realistic cinema experience in your own living room.
ON/OFF. This switch must be turned on before you can operate the system. inputs only when the JBL CINEMA SB250 detects an audio signal on the input it Once this switch is turned on, the system will enter Standby mode was on before going into automatic Standby mode.
Power on/Standby: To bring the JBL CINEMA SB250 to operational mode from Standby mode, press the Power button (the power indicator on the JBL CINEMA SB250 will turn white). To put the system in the Power Indicator: When the subwoofer is in standby mode Standby mode, press the power button while the system is switched ON (the the LED indicator is amber.
Harman Display Surround: This button turns the JBL CINEMA SB250’s Harman Display Surround processing ON/OFF. The Surround button indicator on the JBL CINEMA SB250 turns amber when Surround is active, and turns white when Stereo mode is active. The HARMAN Display Surround setting will produce a complete surround-sound experience for anyone sitting in front of and several feet away from the soundbar.
Bluetooth source. The auto turn-on mode gets activated for analog or optical on the JBL CINEMA SB250 or remote to activate the source. If the JBL CINEMA inputs only when the JBL CINEMA SB250 detects an audio signal on the input it SB250 is in Standby mode, you can automatically wake up the system by was on before going into automatic Standby mode.
Consult your TV’s owner’s manual to find out how to do this. If there is no way to turn your TV’s speakers off, you can adjust the TV’s volume so that your JBL 1. Press the top-panel power button to enter Standby mode (amber color...
JBL CINEMA SB250 TROUBLESHOOTING If your JBL CINEMA SB250 system does not perform the way you think it should, check whether the problem is covered in this section before contacting your dealer or a JBL representative. Problems Solutions If the soundbar does not turn ON •...
Frequency response: 45Hz – 20kHz Maximum SPL: 100dB JBL Cinema SB250 includes two-way, dual driver left and right speaker modules, each with two 55mm (2.25") full range drivers and a 32mm (1.25") dome tweeter Wireless, powered subwoofer with a 165mm (6.5") driver in a ported enclosure...