Searching For A Specific Sequence - Samsung DVD-V18000 Instruction Manual

VCR

Searching for a Specific Sequence

Each time you record a cassette on this DVD-VCR, an "index" is
OK
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
GB
direction selected, the indexes are numbered as follows:
1
Go To 0:00:00 Stop
Use this feature when you want to search for the 0:00:00 counter position
on a cassette. Press the CLEAR button at the point on the tape where you
want to set the counter to 0:00:00.
The VCR will rewind or fast forward, searching for the 0:00:00 counter
position, and then automatically stop at that position.
1
2
End Search
Use this feature when you want to search for a blank position to record a
program on a cassette.
The VCR will fast forward, searching for a blank position, and then
automatically stop at that position.If the VCR reaches the end of the tape
during end search, the tape will be ejected.
1
2
38
Prev Seq. being Next
etc. Seq. played Seq. etc.
2 1 1 2
This DVD-VCR uses a standard indexing system (VISS). As
a result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
After pressing the SEARCH, press the corresponding or
buttons, until the Go To (0:00:00) option is selected.
Press the OK or ❿.
After pressing the SEARCH, press the corresponding or
buttons, until the End Search option is selected.
Press the OK or ❿.
Searching for a Specific Sequence
Intro Scan
1
After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan option is selected.
2 Press the OK or ❿ .
3 ➛ ➛ ❿ ❿
Press the or buttons depending on the direction
where your desired programme is located.
4 When an Index mark is found the DVD-VCR will playback the tape
for 5 seconds, after which it will continue searching for the next
Index mark.
5 If you want to watch the tape from a particular Index, simply press
❿ II
.
ndex Skip Search:
I
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the SEARCH button.
❷
1
After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan option is selected.
2 Press the OK or ❿ .
3 ➛ ➛ ❿ ❿
Press the or buttons twice more. This will take
you directly to the start of the desired programme is located.
4 These Index searches can be made forwards: (press
backwards: (press ➛ ➛ ). ( ➛ ➛ -20
5
To cancel an Index search simply press the
❷
or
❷
INTRO SCAN :
INDEX SEARCH :
or
❷
❿ ❿ ) or
0 +20 ❿ ❿✌
❿ II
or button.
2
VCR
GB
- 6
2
39