Samsung SC-HMX10 User Manual page 52

connection
Connecting to a normal TV (16:9/4:3)
Even if the movie image is recorded in HD quality, it is played back in
●
SD quality on the normal TV not HDTV.
When playing back the HD-quality (1280x720) movie images on an
●
SDTV, the images are down-converted to a low quality of 720x480.
The multi-AV cable does not support HD-quality images so it down-
●
converts them to
SD-quality images.
Method 1
Before connecting
●
your HD camcorder
to a TV, set the same
aspect ratio on your
HD camcorder as on
your TV. page 70
Method 1: Tune
●
the output signal
for TV using the
"Component Out"
function. page 71
Method 2: When connecting with Multi -AV cable.
●
●
If only a mono audio input is available on the TV set, use the audio
cable with the white jack (Audio L).
● You may use an S-Video jack on the cable to obtain better quality
images if you have an S-Video jack on your TV.
● Even if you use an S-Video jack, you need to connect an audio cable.
● When connecting HDMI, component and multi-AV cables at the
same time, the video output priorities are as follows: HDMI output 
Component output  S-Video output  Video output
● When connecting your HD camcorder to TV through HDMI, component,
or multi-AV cable, check whether the connections are correctly made.
● When inserting/removing the HDMI, component, and multi-AV cables,
do not apply excessive force.
● When handling the multi-AV cable and component cable, connect it to
have the same colors connected between the cable connectors and TV
jacks.
● It is recommended to use the AC power adaptor as the power source.
● When the HD camcorder is connected to a TV, you cannot control the
volume of the TV from the camcorder.
44_ English
Normal TV
HD camcorder
COMPONENT IN AUDIO IN
Y Pb Pr L R
Signal fl ow
Component cable
S-VIDEO IN VIDEO IN AUDIO IN
L R
连接
与普通电视机连接 (16:9/4:3)
即使视频图像是以HD质量录制的，在连接了普通电视时也只能以
•
SD质量播放。
当在SD电视机上播放HD质量 (1280x720) 的影音图像时，画面会降
•
低质量为720x480。
multi-AV电缆不支持HD画质，因此使用它将会将画质降低为SD画质
•
Method 2
Normal TV
HD camcorder
S-VIDEO IN
Signal fl ow
Multi-AV cable
方法2：通过Multi–AV电缆连接。 方法2：通过Multi–AV电缆连接。
•
如果电视机上仅有一个单音音频输入，请使用音频电缆与白
•
色接口连接(AUDIO L) 。
如果您的电视机拥有S-Video接口，您可以将电缆与
•
S-Video接口相连以获得更好的图像质量。
即使您使用S-Video接口，也仍然需要连接音频电缆。
•
当与HDMI，分量，multi-AV电缆一起连接，视频输出的顺序
•
是: HDMI输出
分量输出

当您的高清数码摄像机通过HDMI，分量，或multi-AV电缆与
•
电视机连接时，请检查连接的方式是否正确。
当插入/移除HDMI，分量和multi-AV电缆时，不要用力过大。
•
• 当使用multi-AV电缆和分量电缆时，用同样颜色的数据线连接
电视机上同样颜色的接口。
建议您使用交流电源适配器提供电能。
•
当高清数码摄像机与电视机相连，不能使用摄像机控制音
•
量。您可以通过电视机控制音量
COMPONENT IN AUDIO IN
Y Pb Pr L R
的图像。 的图像。
在将高清数码摄像机
• •
连接至电视机之前， 连接至电视机之前，
请将电视机与高清数
码摄像机调整为相同
的高宽比。
VIDEO IN AUDIO IN
L R
 第70页
方法1：将电视
• •
or
机的输出信号调整为 机的输出信号调整为
使用"Component
Out"(分量输出)功
能。第71页
S-Video 输出
视频输出。
 
中文 _44