Internal Connectors; Accessories; Warranty - RME Audio Hammerfall DSP System MADI User Manual

6.2 Internal Connectors

X6
15-pin connector for the included HDSP MADI Expansion Board.
X7
10-pin connector. No function.
X1
No function. Used to program the card in the factory.
Blue Jumper
The internal blue jumper X4 offers to change the voltage level at the coaxial MADI output. In the
lower position, the card generates 600 mVpp, according to the specification. Changing the
jumper to the upper position, the output voltage is increased to 1.2 Vpp. This setting is not in-
tended to be used in normal operation. But in case of a very long or 'lossy' coaxial cable, this
setting may ensure an error-free operation of the transmission line.

7. Accessories

RME offers several optional components. Additionally parts of the HDSP MADI, like the special
breakout cables, are available separately.
Part Number
BOHDSP9652
VKHDSP9652
ONK1
ONK3
ONK6
ONK10
ONK20

8. Warranty

Each individual Hammerfall DSP undergoes comprehensive quality control and a complete test
at RME before shipping. The usage of high grade components allows us to offer a full two year
warranty. We accept a copy of the sales receipt as valid warranty legitimation.
If you suspect that your product is faulty, please contact your local retailer. The warranty does
not cover damage caused by improper installation or maltreatment - replacement or repair in
such cases can only be carried out at the owner's expense.
RME does not accept claims for damages of any kind, especially consequential damage. Liabil-
ity is limited to the value of the Hammerfall DSP. The general terms of business drawn up by
Audio AG apply at all times.
8
Description
MIDI breakout cable
14-conductor flat ribbon cable
MADI Optical Network Cable, 3.3 ft (1 m)
MADI Optical Network Cable, 10 ft (3 m)
MADI Optical Network Cable, 20 ft (6 m)
MADI Optical Network Cable, 33 ft (10 m)
MADI Optical Network Cable, 66 ft (20 m)
User's Guide HDSP MADI © RME