Table of Contents
Advertisement
6.2 Internal Connectors
X300
14-pin connector for the included HDSPe MADI Expansion Board.
X402
10-pin connector for a connection of the Time Code Option (TCO).
X100
No function. Used to program the card in the factory.
X400 Sync In
Internal word clock input for synchronization of multiple cards via SYNC OUT.
X401 Sync Out
This 3-pin connector carries an internal word clock signal. It can be used to synchronize multiple
cards with sample accuracy, and without the need for an external connection. The card where
SYNC OUT is used is Master, the one with SYNC IN is Slave. In the Settings dialog the Slave
has to be set to Sync In under Pref. Sync Ref, the Clock Mode must be set to AutoSync.
User's Guide HDSPe MADI © RME
10
Advertisement
Table of Contents
