2
Connecting and Using a Source Device
Entering MagicInfo mode
1
After installing and connecting the network box (sold separately) to the product, power on the
product.
2
Press
SOURCE
Connecting the network box to the HDMI port on the product will change
MagicInfo.
3
Select the default application you want to run when MagicInfo starts.
on the remote control, and select MagicInfo.
MagicInfo Setup Wizard - v.1.12
Select Application - step 1
MagicInfo Pro (LAN, WAN based version)
MagicInfo-i Premium (Web-based version)
Select Later
< Back(B)
Next(N) >
Finish
Cancel
2 Connecting and Using a Source Device
Source
from
HDMI
to
64