Samsung ME32B User Manual page 161

8
System
Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theater) instead of the
1
Select Receiver
2
Press the EXIT
If your receiver supports audio only, it may not appear in the device list.
When the receiver (i.e Home Theater) is set to On, you can hear sound output from the
product Optical jack. When the source is a digital component such as a DVD player and it is
connected to the product via HDMI, you will hear only 2 channel sound from the receiver.
Troubleshooting for Anynet+
Problem
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
The message "Connecting to
Anynet+ device..." appears on
the screen.
and set to On.
button to exit.
Check if the device is an Anynet+ device. The Anynet+ system
supports Anynet+ devices only.
You can connect only one receiver (home theater).
Check if the Anynet+ device power cord is properly connected.
Check the Anynet+ device's Video/Audio/HDMI cable
connections.
Check whether
Anynet+setup menu.
Check whether the remote control is Anynet+ compatible.
If you have removed and then reconnected the HDMI cable,
please make sure to search devices again or turn your product off
and on again.
Check if the Anynet+ function of the Anynet device is set on.
Check if the Anynet+ device is properly connected to the product
and check if the
Anynet+ Setup menu.
Press the
a menu you want.
Select View PC
Press the
select a non- Anynet+ device.
You cannot use the remote control when you are configuring
Anynet+ or switching to a view mode.
Use the remote control after the product has completed Anynet+
configuration or has finished switching to Anynet+.
Possible Solution
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
TOOLS button to display the Anynet+ menu and select
in the Anynet+ menu.
SOURCE button on the product remote control and
Internal Speaker.
is set to On in the
is set to On in the
161
8 System