Memorizing Channels; Editing Channels; Other Features - Samsung 4 series User Manual

Basic Features
¦ Memorizing channels
O
MENUm → Channel → ENTERE
Antenna (Air / Cable)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Auto Program
■ Air: Air antenna signal.
■ Cable: Cable antenna signal.
■ Auto: Air and Cable antenna.
✎
NOTE
x
When selecting the Cable TV system: STD, HRC
and IRC identify various types of cable TV systems.
Contact your local cable company to identify the
type of cable system that exists in your particular
area. At this point, the signal source has been
selected.
x
After all the available channels are stored, it starts
to remove scrambled channels. The Auto Program
menu then reappears.
¦ Editing Channels
O
MENUm → Channel → Channel List → ENTERE
Channel Name Edit
1. Select a channel and press the
2. Edit the channel name using the Channel Name Edit
menu.
■ Channel Name Edit (analog channels only): Assign your
own channel name.
¦ Other Features
O
MENUm → Channel → ENTERE
Clear Scrambled Channel
This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to
20~30 minutes.
14
English
t
TOOLS button.
How to Stop Searching Scrambled Channels
1. Press the ENTER E button to select Stop.
2. Press the ◄ button to select Yes.
3. Press the ENTER E button.
✎
This function is only available in Cable mode.
Channel List
Channel List Option Menu
Set each channel using the Channel List menu options
(Add / Delete, Timer Viewing, Select All / Deselect All).
Option menu items may differ depending on the channel status.
1. Select a channel and press the
2. Select a function and change its settings.
■ Add / Delete: Delete or add a channel to display the
channels you want.
✎
NOTE
x
All deleted channels will be shown on the
All Channels menu.
x
A gray-colored channel indicates the channel
has been deleted.
x
The Add menu only appears for deleted
channels.
x
Delete a channel from the Added Channels or
Favorite menu in the same manner.
■ Timer Viewing: You can set a desired channel to be
displayed automatically at the reserved time. Set the
current time first to use this function.
1. Press the ◄ / ► / ▲ / ▼ buttons to select the
desired channel in Channel List.
2. Press the TOOLS
Timer Viewing.
3. Scroll up or down to adjust the settings in the box,
or use the numeric buttons on your remote to enter
the date and time.
✎
If you selected Once, Every Week or
Everyday in Repeat, you can enter the date
you want.
4. Select OK, then press the ENTERE button when
done.
TOOLS button.
button, then select