Sound Menu; Memorizing Channels; Managing Channels - Samsung 5 Series User Manual

Screen Frt: Displays the full image without any cut-off when your Preferred Language
те i s inputting HDMI (10801 ‫ ن‬l O SOp) or Component (10801/
e
1Q80p)HD signals.
HD (High Definition) has a 16:9 aspect ratio and 1080Ι/1080Ρ
(1920x1080) or 720p (1280x720) resolution.
You can adjust and store settings for each external device you
have connected to an input on the те. Picture Sizes available
by Input Source are listed below:
Digital channels only.
Digltal-те broadcasts can tra
Remote control buttons active on ttie cflannel tist screen.
* Green (Zoom): Enlarges or shrinks a channel number.
٠ Yellow (Select); Move the cursor to a channel. Press the Yellow
button to select the channel. A
select additional channels, then, open the fools menu and apply
a function to ttie channels you selected.
" Я (fools): Displays the Channel list tools menu, (the fools
menus may differ depending on the situation.)
Display Icons Used in the Channel List Screens
mark appears. Repeat to
Air
If your те is connected to an antenna choose Air, and then press
ENTERO،. The те will automatically start memorizing channels.
nsmit many audio tracks
simultaneously (for example, simultaneous translations of a program
into foreign languages).
You can only select a language from among the ones being
broadcast.
Cable
If your те is connected to a cable outlet, choose Cable, and then
press ENTERO. Go to step 3.
Auto
If you choose Auto, and then press ENTERO, the те will
automatically select the correct Antenna source. Go to step 3.
3. On the Cable Type screen, use the -./►/Α/Τ buttons to
select the type of digital and analog cable systems you have:
STD, HRC, or IRC. Most systems are STD (Standard). When
done, select start, and then press ENTER o. The ет will start
memorizing channels.
Channel memorization can take up to 45 minutes,
depending on your cable system.
Memorized channels are added to the Added Channels
list. These are the channels you will see when you use the
Channel buttons on your remote.
Mutti-Track Sound (MTS)
Analog channels only.
■ Mono: Select for channels that are broadcasting in mono or if
you are having difficulty receiving a stereo signal.
‫ ا‬Stereo: Select for channels that are broadcasting in stereo.
■ SAP: Select to listen to the Separate Audio Program, which is
usually a foreign-
Depending on the program being broadcast, you can listen to
Mono, Stereo or SAP.
Autp ٧٥!ите
translation
Input Source
Picture Size
Icons Meaning
16:9, Zoomi, ZoomZ,
A selected channel.
Ате, AV, Component (4801, 480ρ)
4:3
A Favorite channel.
DTV (10801, lOSOp), Component (10801,
1080Ρ), HDMl (10801, tOBOp)
16:9, Wide Fit, 4:3,
Screen Fit
©
A resereed program.
٥ A program currently being broadcast.
Digital Noise Filter (Off / tow / Medium /High/ Auto) : It the
broadcast signal received by your те is weak, you can activate
the Digital Noise Filter feature to reduce any static and gtiosting
that may appear on the screen.
When the signal is weak, try all ttie Digital Noise Filter
options until the TV displays the best picture.
HDMI Black level (Normal / low) : For HDMI signals, select
the black level to adjust the screen depth, low make blacks look the sound output when ttie modulation signal is high or by raising
the sound output when the modulation signal is low.
each station has its own broadcasting conditions, the
volume may fluctuate each time you change the channel. This
feature automatically adjusts the volume of a channel by lowering
darker.
TOOLS^
□ The Channe. List Tools Menu
The Channel list Tools menu contains most of the functions you
can use on the All cflannel. Added Channels, and Favorite list
screens. To view, select a list screen, select a channel, and then
press the TOOLS button.
■ Add / Delete: Delete a channel from or add a channel to the
Added Channels list.
Clear Scrambled cflannel
Ilris function filters out scrambled channels after Auto Program is
completed. This process may take up to 20-30 minutes.
Press the ENTER Q‫ ؛‬button to stop the Clear Scrambled
Cliannel.
Tills function is only available in Cable mode.
Available only in HDMI mode (RGB signals).
Film Mode (Off / Auto) : Sets the те to automatically sense and
process film signals from all sources and adjusts the picture tor
optimum guality.
Available in AIV, DTV (interlace). AV, COMPONENT (4801 /
10801) and HDMI (4801/10801).
■ LED Motion Plus (Off/On): Removes drag from fast scenes
with a lot of movement to provide a clear picture.
Picture Reset
■ Picture Reset (Reset Picture Mode/Cancel): Resets the
picture settings to their faeton, defaults.
Sound Reset
To delete channels from the Added Channels list, follow these
steps:
1. Select one or more channels in the Added Channels list
using the Α/Τ buttons and tlie Yellow (Select) button on your
remote.
2. Press the TOOLS button on your remote. Itie Tools menu
appears.
3. Select Delete in the Tools menu, and then press the ENTERS
button.
To add channels to the Added Channels list, follow these steps:
1. Select one or more cliannels in the All Cliannels list using the
Α/Τ buttons and the Yellow (Select) button on your remote.
2. Press the TOOLS button on your remote. The Tools menu
appears.
3. Select Add In the Tools menu, and then press the ENTERS
button.
All deleted channels will be shown on the All ctiannels list.
You add channels back to the Added cflannels list on the
All cflannels list.
A gray-colored channel indicates the channel has been
deleted from the Added cflannels list.
The Add menu option only appears for deleted channels.
И Add to Favorite/Delete from Favorite: lets you add channels to
and delete channels from your Favorites list.
To add channels to the Favorites list, follow these steps:
1. Select one or more channels in the All Channels/Added
Channels list using the A/▼ buttons and the Yellow (Select)
button on your remote.
2. Press the TOOLS button on your remote.' The Tools menu
appears.
3. Select Add to Favorite in the Tools menu, and then press the
ENTERQ button.
Reset All: Resets all sound settings to the factop, defaults.
□ Managing Channels
เ"
Channel Menu
cflannel List
See your list of Added ctiannels. Favorite channels, or channels
you've sctieduled for viewing. Add or delete Favorite channels, add
or delete channels from the Added Channels list, schedule channels
or programs for viewing. Watch a channel by selecting the channel
in the All Channels, Added Channels, or Favorite screen, pressing
the A / buttons, and then pressing the ENTERÖ button.
□ Memorizing Channels
When you first set up your^ using Plug & Play, the TV
memorized the channels that were available over the air or through
your cable system and added them to the Channel List. The
Antenna and Auto program functions described below let you
re-run the channel memorization function without having to re-run
the Plug & Play procedure.
Antenna (Air/Cable)
Before your television can memorize the available channels, you
must select your те 'з signal source. Air (using an antenna) or
Cable. Select Menu >Channel > Antenna > Air or Cable. After
you have selected the signal source, go on to the Auto Program
function.
Selecting the signal source using the Antenna function also
determines the signal source the TV is tuned to. For example,
if you receive your TV signal over the air. and you select
Cable, you will see only snow. You must select Air to see a
picture.
Auto Program
The Auto Program function memorizes all channels that are
available over the air or through your cable system and adds them
to the Channel List.
To start Auto Program, follow these steps:
1. Push MENU Ш -» Channel » Auto Program ٠ ENTER и
on your remote. The Antenna Source screen appears.
2. On the Antenna Source screen, select the source of your те
signal.
Ill
Sound Menu
..Щ■ fri
,WK
Mode
■ standad: Selects the normal sound mode.
И Music: Emphasizes music over voices.
■ Movie: Provides the best sound for movies.
■ Clear Voice: Emphasizes voices over other sounds.
■ Amplify: Increase the intensity of high-frequency sounds to allow
a better listening experience for the hearing impaired.
Equalizer
Available in standard sound mode only.
■ Balance t/R: Adjusts the balance between the right and left
speaker.
‫ ا‬lOOHz / 306Hz/IKHz/3ΚΗζ/lOKHz (Bandwidth
Adjustment): Adjusts the loudness of specific bandwidth
frequencies.
" Reset: Resets the equalizer to its default settings.
SRS TruSurround HD
Available in standard sound mode only.
SRS TruSurround HD is a patented SRS technology that solves
the problem of playing 5.1 multichannel content through two
speakers. IruSurround delivers a compelling, virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. It is ftjlly compatible with all
multichannel formats.
V fri ,TVK
IM ,tv،ò
11٠1 ,Wffll
Zoom I Tools
Channel List Screens icons are listed on the left side. Select an
icon usino the A,▼ buttons to view each list.
All Channels: Shows all currently available channels including
those you deleted from the Added Channels list.
I Added Channels: Shows all Added Channels. These are the
channels that appear when you press ttie CH button.
V Favorite: Shows all favorite channels.
٠ Programmed: Shows all channels and programs currently
scheduled using Timer Viewing.
‫ا‬
3