Nam Programming - Samsung SCH-811 Service Manual

4. NAM Programming

NAM features can be programmed as follows:
Notes:
-If you enter the NAM program mode, each item shows the currently stored data. Go to the next item by
pressing OK.
-You can modify the data by entering a new data.
-If you enter a wrong digit, press CLR to delete the last digit. Press and hold CLR to delete all digits.
-To scroll items backwards or forwards, press the VOLUME button on the left side of the phone.
4-1 General Setup
LCD Display
NAM program
1:General
2:Setup NAM1
3:Setup NAM2
ESN
E9031F77
CAI version
3
VOC13K/8K
SO_VOICE_08K
SCM
01101010
Lock Code
0000
Slot Mode
Yes
Slot Index
2
OK -store it.
Pref NAM(1~4)...
Digital pref
SAMSUNG Proprietary-Contents may change without notice
Key in
47*869#08#9
1
Volume
Volumet
Volume
Volume
4-digit code
OK
or
OK
0-7
or
OK
-selects NAM programming
-choose ÔGENERALÕ
-Electronic Serial Number of the phone is displayed
-Common Air Interface version is displayed
-Vocoder Rate
-Station Class Mark displays the power class,
transmission, slotted class, dual mode.
Lock code, current ststus is displayed
-to change, enter new code.
-store it
Slot mode. ÔYesÕ indicates the slot mode.
-changes the status.
-store it.
Slot mode index. The higher, the longer sleeping time
-to change, enter new one.
Preferred system selection for NAM(1~4).
Up to four NAMs are allowed for the phone. This lists
one of the four NAMs and allows you to program both
the FM and CDMA settings.
Function
4-1