Adjusting The Fuser Temperature - Xerox DocuPrint C1110 User Manual

7.11

Adjusting the Fuser Temperature

When you get bad printing results such as printed images or texts coming off or double
printing with appropriate margins, adjust the fuser temperature to solve these printing
problems.
The fuser temperature can be adjusted for each paper type within the range of -2 to 2 in
increments of 1. The default is "0".
Use the following procedure to adjust the fuser temperature.
1. Press the <Menu> button on the control
panel to display the menu screen.
2. Press the < > button until [Admin Menu] is
displayed.
3. Press the < > or <Eject/Set> button to
accept the selection.
[Wired Network] is displayed.
4. Press the < > button until [Maintenance
Mode] is displayed.
5. Press the < > or <Eject/Set> button to
accept the selection.
[Adjust PaperType] is displayed.
6. Press the < > button until [Adjust Fuser] is
displayed.
7. Press the < > or <Eject/Set> button to
accept the selection.
[Plain Paper] is displayed.
8. Press the < > button until the paper type
you want to set is displayed.
(Example: Recycled Paper)
9. Press the < > or <Eject/Set> button to
accept the selection.
A screen that allows you to enter the value
is displayed.
10. Press the < > or < > button to set the
value, then press the <Eject/Set> button.
(Example: 1)
11. Press the <Menu> button to return to the
print screen.
Menu
Report / List
Menu
Admin Menu
Admin Menu
Wired Network
Admin Menu
Maintenance Mode
Maintenance Mode
Adjust PaperType
Maintenance Mode
Adjust Fuser
Adjust Fuser
Plain Paper
Adjust Fuser
Recycled Paper
Recycled Paper
0 *
Recycled Paper
1 *
7.11 Adjusting the Fuser Temperature
165