Font Size; Font Pitch; Draft Mode; Output Color - Xerox DocuPrint C3055 DX Settings Manual

Font Size

Sets the font size within the range of 4.00 to 50.00 pt in increments of 0.25 pt. The default
is [12.00].

Font Pitch

Sets the font pitch (number of characters per inch) within the range of 6.00 to 24.00 cpi in
increments of 0.01 cpi. The default is [10.00].
Form Line
Sets the form line (number of lines within one form) within the range of 5 to 128 lines in
increments of 1. The default is [64].
Quantity
Sets the number of copies to be printed within the range of 1 to 999. The default is [1 Set(s)].
Image Enhance
Image Enhance is a feature that artificially increases resolution by smoothing out transitions
between black and white and reducing jagged appearance. Set whether or not to enable
Image Enhance by selecting [On] (default) or [Off].
HexDump
HexDump is a feature that prints the contents of data in ASCII codes (hexadecimal format).
Set whether or not to enable HexDump by selecting [Enable] or [Disable] (default).

Draft Mode

Enabling Draft Mode uses less toner when printing. This mode increases print speed but
decreases print quality. Set whether or not to enable Draft Mode by selecting [Enable] or
[Disable] (optional).

Output Color

Sets the output color to [Color] (default) or [Black].

Line Termination

Sets the line termination control codes. Set how you want the printer to interpret CR, LF and
FF control codes. The optional values and their interpretations are as follows:
Optional Values
Interpretation
Off (default) CR
Add-LF CR + LF
Add-CR CR
CR-XX CR + LF
CR LF
Interpretation
LF
LF
CR + LF
CR + LF
FF
Interpretation
FF
FF
CR + FF
CR + FF
2.2 Setting the PCL Mode Menu
15