Xerox Phaser 3150 User Manual page 6

4
Using a PostScript Driver
7
Replace the two screws.
8
Reconnect the power cord and printer cable, and turn the
printer on.
N : If you want to use an optional memory DIMM with your
OTE
PostScript printer driver, you need to select it in the printer
properties after installing the memory DIMM.
To do so:
1. Click the Windows Start menu.
2. For Windows 98/Me/NT 4.0/2000, select Settings and then
Printers.
For Windows XP, select Printers and Faxes.
3. Select the PostScript printer driver for the 3150.
4. Click the right mouse button on the printer icon and select
Properties.
5. For Windows 98/Me, select Device Options tab.
For Windows NT 4.0/2000/XP, select Device Setting tab.
6. Select the total memory size installed in Installable Option.
For example, if you installed 32 MB memory DIMM, then select
64 MB (additional memory + 32 MB base memory) and click OK.
For Windows 98, select Installable Option ¡
VMOption ¡ change setting for:VMOption ¡
Select the total memory size installed.