Other Unix Systems - Planet XRT-811 User Manual

XRT-811 User's Manual
Field
Name
Spool Directory
File Limit
Remote Host
Remote Queue
4. Save this data, and exit the Printer Configuration. Configuration is now completed, and the
printer is now available for use.

Other Unix Systems

To access the Internet via XRT-811:
Ensure the "Gateway" field for your network card is set to the IP Address of XRT-811.
Ensure your DNS (Name Server) settings are correct.
Printing Setup
To use LPD printing to XRT-811's printer, install an LPD printer using the standard procedure
for your system.
Use XRT-811's IP Address as the location of the remote host
Use L1, L2, or L3 for the name of the printer on the remote host.
On XRT-811, the logical printers (L1, L2, and L3) can be configured on the Advanced - Printer
Port screen. See Printer Port in Chapter 7 for details.
Data
Enter a name for this printer
/var/spool/lpd/printer_name
Where printer_name is the "Name"
entry above.
Enter a suitable number.
XRT-811's IP address
Note:
If you have made a host file entry, you can use the name from the
host file instead of the IP Address.
Ln
Where n is the Logical Printer number
(L1, L2, L3). Logical Printers can be
configured on XRT-811's Options-
Printer Port screen.
Example
gw_prn
/var/spool/lpd/gw_prn
0 (no limit)
192.168.0.1
L1
36