Wan - Planet WRT-405 User Manual

22mbps wireless broadband router
Table of Contents

Advertisement

Host Name: Type the host name in the text box. The host name is required by some ISPs.
The default host name is "AP-Router."
IP Address: This is the IP address of the router. The default IP address is 192.168.1.1.
Subnet Mask: Type the subnet mask for the router in the text box. The default subnet
mask is 255.255.255.0.
DHCP Server: Enables the DHCP server to allow the router to automatically assign IP
addresses to devices connecting to the WLAN or LAN. DHCP is enabled by default. All
DHCP client computers are listed in the table at the bottom of the page, providing the host
name, IP address, and MAC address of the client.
Start IP: Type an IP address to serve as the start of the IP range that DHCP will use to
assign IP addresses to all LAN devices connected to the WRT-405.
End IP: Type an IP address to serve as the end of the IP range that DHCP will use to
assign IP addresses to all LAN devices connected to the WRT-405.
Domain Name: Type the local domain name of the network in the text box. This item is
optional.

3.1.2 WAN

Please refer to your Internet connection method to select the Connection Type. And please configure
those settings per the information your ISP provides.
Connection Type: Select the connection type, either DHCP client/Fixed IP or PPPoE from
the drop-down list.
When using DHCP client/Fixed IP, enter the following information in the fields (some information are
provided by your ISP):
WAN IP: Select whether you want to specify an IP address manually, or want DHCP to
obtain an IP address automatically. When "Specify IP" is selected, type the IP address,
subnet mask, and default gateway in the fields. Your ISP will provide you with those
informations.
DNS 1/2/3: Type up to three DNS numbers in the fieldes. Your ISP will provide you with this
DNS information.
MAC Address: If required by your ISP, type the MAC address for the WRT-405 WAN
interface in this field. You can also copy the MAC address of your PC' s network card to
the WRT-405 WAN interface by clicking "Clone MAC address".
- 6 -

Advertisement

Table of Contents
loading

Table of Contents