Replacing A Front Side Marker Light Bulb - Honda 2010 Accord Crosstour Owner's Manual

Lights
4. Install the new bulb and turn it
clockwise to lock it in place.
Insert the socket back into the
5.
headlight assembly. Turn it
clockwise to lock it in place.
6. Turn on the lights to make sure
the new bulb is working.
7. Driver's Side
Reinstall the splash separator and
duct securely. Reinstall the
fastener and secure it by pushing
on the head until it locks.
Passenger's side
Reinstall the coolant reserve tank.
348
Replacing a Front Side Marker
Light Bulb
1. To change the bulb on the driver's
side, start the engine, turn the
steering wheel all the way to the
right, then turn off the engine. To
change the bulb on the passenger's
side, turn the steering wheel to the
left.
2010 Accord Crosstour
HOLDING CLIP
SCREW
2. Use a flat-tip screwdriver to
remove the holding clip from the
inner fender, and remove the
screw with a Phillips-head
screwdriver.