To Program The Park Unlock Mode; To Program The Ignition Switch Unlock Mode - Honda 2010 Accord Crosstour Owner's Manual

To program the Park Unlock mode:

Unlocks the driver's door or all doors
and tailgate when the shift lever is
moved to Park (P) position with the
brake pedal depressed.
1.
Make sure the shift lever is in the
Park (P) position.
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
3. Push and hold the rear of the
master door lock switch on the
driver's door. You will hear a click.
Continue to hold the switch:
Until you hear another click
(after about 5 seconds) to
activate
driver's door unlock
feature.
Or, until you hear two more
clicks (after about 10 seconds)
to activate all doors and tailgate
.
unlock feature
4. Release the switch, and within 20
seconds, turn the ignition switch
to the LOCK (0) position.
2010 Accord Crosstour
Door Locks
To program the Ignition Switch
Unlock mode:
Unlocks the driver's door or all doors
and tailgate when the ignition switch is
moved out of the ON (II) position.
1.
Make sure the shift lever is in the
Park (P) position.
2. Turn the ignition switch to the ON
(II) position, and make sure to
close the driver's door.
CONTINUED
85