Driving Position Memory System
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button's memory. If
you want to add a new position while
retaining the current one, use the
other memory button.
All stored driving positions will be
lost if your vehicle's battery goes
dead or is disconnected.
102
To cancel the storing procedure
after pressing the SET button, press
the SET button again within 5
seconds.
2010 Accord Crosstour
Selecting a Memorized Position
MEMORY BUTTONS
To select a memorized position, do
this:
1.
Make sure the parking brake is set
and the shift lever is in Park.
2.
Press the desired memory button
(1 or 2) until you hear a beep, then
release the button.