Bulb
Tab
Coupler
Side Marker Light Bulb
When replacing, use the following bulbs.
Side Marker Light: 3 CP
Bulb
Socket
* Not available on all models
2. Remove the coupler.
u
It can be removed by pushing the tab.
3. Rotate the old bulb to the left to remove.
4. Insert new bulb.
1. Turn the socket to the left and remove it,
then remove the old bulb.
2. Insert a new bulb.
I n f o r ma t i o n P r o v i d e d b y :
uuReplacing Light BulbsuSide Marker Light Bulb
*
1Fog Light Bulbs
Insert a flat-tip screwdriver, lift and remove the
central pin to remove the clip.
Central pin
Insert the clip with the central pin raised, and push
until it is flat.
Push until the
pin is flat.
311