Maintenance - Haier HWMP55-918 User Manual

Maintenance

Remove the power plug before carrying out any cleaning or maintenance.
Clean the lint filter(s) and detergent box after each wash.
Remove and clean the detergent
box, replace after cleaning.
Dismantle
The filter at the water inlet valve may
become blocked by impurities in the
water supply. Clean it with a plastic
bristled brush every two months.
1. After washing cycle has finshed, turn off the water faucet. (If needed, you can
remove the water inlet hose).
2. Do not store water in the washing machine for a long period without completing
a wash cycle. Drain the water completely after each wash.
3. Hang up the power cord and drain hose.
4. Wipe up any drops of water on the surface of the machine and inside the tub.
Leave the lid open for about 1 hour after each wash to evaporate any residual
water.
The lint filter must be used during
washing.
It must be cleaned after each use
Lint filter:
1. Slide upwards to remove.
2. Gently push it down to install;
Directions for cleaning lint filter on model HWMP55-918
remove
Install
Directions for cleaning lint filter on model HWMP65-918
Install
If the cabinet is dirty, wipe it with a damp
cloth.
14
ensuring it is in place before
next wash.
Install
Dismantle
Dismantle
Install
The front cover of lint filter
Do not wash directly with water.
Wipe with a neutral detergent (please
check directions on detergent bottle
first).
Do not wipe machine with thinners,
petrol, alcohol or other harsh solvents.
l
P e t r o
T h in n e r
Alcohol