Using The Self-Timer - Casio EXILIM EX-ZR300 User Manual

Using the Self-timer (Self-timer)
With the Self-timer, pressing the shutter button starts a timer. The shutter is released
and the image is shot after a fixed amount of time.
1.
In the REC mode, press [SET].
2.
Use [8] and [2] to select the fourth control panel option from the
bottom (Self-timer).
3.
Use [4] and [6] to select the setting you want and then press [SET].
10 sec 10-second Self-timer
Ñ
2-second Self-timer
• When shooting under conditions that slow down the shutter speed,
2 sec
Ì
you can use this setting to prevent image blur due to camera
movement.
Shoots three images: one image 10 seconds after the shutter button
is pressed, and the next two images as soon as the camera is ready
X3
Ï
after shooting the previous image. How long it takes for the camera
(Triple Self-
to get ready to shoot depends on the image size and quality settings,
timer)
whether or not a memory card is loaded in the camera, and the flash
charge condition.
Off Self-timer is disabled.
Î
• The front lamp flashes while the Self-timer countdown is in
progress.
• You can interrupt an ongoing Self-timer countdown by
pressing [SET].
NOTE
• The Self-timer cannot be used together with the following features.
High Speed CS with Prerecord CS, Prerecord (Movie), Lag Correction, Slide
Panorama, Wide Shot
• The Triple Self-timer cannot be used together with the following features.
Movie, High Speed CS, Multi SR Zoom, High Speed Night Shot, High Speed Best
Selection, For YouTube, Blurred Background
50
Front lamp
Snapshot Tutorial