To Shoot A Movie With Hdr Art - Casio EXILIM EX-ZR300 User Manual

3.
Use [4] and [6] to select the
intensity of the art effect.
4.
Press [SET].
5.
Press the shutter button to shoot.
• After you press the shutter button, the message "Busy... Please wait..." will
appear on the monitor screen to indicate that recording is in progress. Keep the
camera still while this message is displayed. The recording process takes
some time to complete after the message appears. Image shooting is disabled
while the message is displayed.
NOTE
• HDR Art works best when shooting with the camera mounted on a tripod.
• Shooting with this function causes the flash setting to change automatically to ?
(Flash Off).
• Anti Shake correction performed to compensate for camera movement while
shooting with this function results in an image area that is narrower than normal.
• The desired HDR Art effect may not be attained if the camera or subject moves
during shooting.
• Depending on shooting conditions and image composition, this function may not be
able to produce the desired result.
To shoot a movie with HDR Art (HDR Art Movie)
1.
In the REC mode, set the mode dial to [a] (HDR Art).
2.
Record the movie the same way as you would a normal movie
(page 67).
Press [0] (Movie) to start and stop recording.
IMPORTANT!
• Certain shooting conditions when shooting a movie with this function can cause the
image and audio to be out of sync.
• "Art Effect" settings are not reflected in movies.
NOTE
• With HDR Art Movie, the "» Quality" setting can be either "HD" or "STD" only
(page 100).
• When any "» Quality" setting other than "STD" is selected in another mode, the
"HD" setting is used when shooting with HDR Art Movie.
Art Effect: 1
Art Effect: 2
Art Effect: 3
63
Weak
Normal
Strong
Snapshot Tutorial