Viewing Snapshots And Movies On A Tv Screen - Casio EXILIM EX-ZR300 User Manual

Viewing Snapshots and Movies on a TV Screen

1.
Use the optionally available AV cable (EMC-8A) to connect the camera
to the TV.
Yellow
Video
TV
AUDIO IN jack (red)
AUDIO IN jack (white)
VIDEO IN jack (yellow)
• Make sure that you insert the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
• Make sure that the camera is turned off before plugging
in or unplugging the cable. Check the user
documentation that comes with the TV for information
about requirements before plugging into or unplugging
from the TV.
2.
Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is
connected.
3.
Turn on the camera and press [p] (PLAY).
This will cause an image to appear on the TV screen, without anything appearing
on the camera's monitor screen.
• You also can change the aspect ratio of the screen and the video output
system (page 166).
4.
Now you can display images and play back movies as you normally do.
White Red
Audio
Making sure that the 6 mark on the camera is
aligned with the 4 mark of the AV cable connector,
connect the cable to the camera.
AV cable (EMC-8A)
112
Terminal cover
[USB/AV] port
Viewing Snapshots and Movies