Configuring Auto Power Settings; Selecting The Screen Aspect Ratio And Video Output System - Casio EXILIM EX-JE10 User Manual

Configuring Auto Power Settings (Auto Power Off)
Procedure
[MENU] * "Set Up" Tab * Auto Power Off
Auto Power Off turns off the camera whenever no camera operation is performed for
a preset amount of time.
Trigger Time Settings: 1 min, 2 min, 5 min (The trigger time is always 5 minutes in the
PLAY mode.)
• Auto Power Off is disabled under any of the following conditions.
– While the camera is connected to a computer or other device
– During a slideshow
– During "O Tracking"
– During Voice Recording playback or recording
– During movie recording and playback

Selecting the Screen Aspect Ratio and Video Output System

(Video Out)
Procedure
[MENU] * "Set Up" Tab * Video Out
You can use the procedure in this section to select either NTSC or PAL as the video
output system. You can also specify an aspect ratio of 4:3 or 16:9.
NTSC Video system used in Japan, the U.S., and other countries
PAL Video system used in Europe and other areas
4:3 TV screen aspect ratio of 4:3
16:9 Wide screen aspect ratio
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.
Images will not display correctly if you select the wrong aspect ratio.
• Images will not display correctly unless the camera's video signal output setting
matches the video signal system of the TV or other video equipment.
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC
or PAL.
• An optionally available AV cable (EMC-7A) is required for video output.
97
Other Settings (Set Up)