Snapshot Tutorial; Using The Control Panel - Casio EXILIM EX-JE10 User Manual

Snapshot Tutorial

Using the Control Panel

The Control Panel can be used to configure camera settings.
1.
In the REC mode, press [SET].
• You can also display the control panel by
pressing [SET] towards [2].
2.
Press [SET] towards [8] or [2] to select
the setting you want to change.
This will select one of the Control Panel icons
and display its settings.*
Available settings
Control Panel
*
Items displayed in the control panel depend on the recording mode.
3.
Press [SET] towards [4] or [6] to change the setting.
4.
If you want to configure another setting, repeat steps 2 and 3.
5.
After all of the settings are the way you want, press [SET].
This will apply the settings and return to the REC mode.
If you selected "BS", the BEST SHOT scene menu will appear.
• You can close the Control Panel by pressing [MENU].
NOTE
• No icon is displayed for any Control Panel option (page 9) that is set to its initial
default (reset) setting. An icon will appear only if you change the setting of the
corresponding Control Panel option. The following are the initial defaults for Control
Panel options.
– Flash: Auto Flash
– Self-timer: Off
– Make-up: Off
• You also can configure settings other than those listed above (page 47).
1
Auto recording mode (page 23)
1
2 Flash (page 32)
2
Self-timer (page 34)
3
3
Make-up (page 35)
4
4
BEST SHOT scene selection (page 42)
5
5
31
Snapshot Tutorial