Time Stamping Snapshots - Casio EXILIM EX-JE10 User Manual

4.
Press [SET] towards [8] or [2] to select the city you want and then
press [SET].
5.
Press [SET].
IMPORTANT!
• Before configuring World Time settings, make sure that the Home City setting is
the place where you live or normally use the camera. If it isn't, select "Home" on the
screen in step 1 and configure the Home City, date, and time settings as required
(page 95).
Time Stamping Snapshots (Timestamp)
Procedure
[MENU] * "Set Up" Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
Example: July, 10, 2015, 1:25 p.m.
Date
Date&Time
Off
• Even if you do not stamp the date and/or time with Timestamp, you can do so later
using the DPOF function or some printing application (page 78).
• Digital zoom is disabled while time stamping is turned on.
• Time stamping is disabled when certain BEST SHOT scenes are being used.
2015/7/10
2015/7/10 1:25pm
No stamping of date and/or time
94
Other Settings (Set Up)