Assigning Functions to the Control Dial (Control Dial)
Procedure
Enter the REC Mode * [MENU] * " r REC MENU" Tab * Control Dial
You can assign any one of the four functions below to the control dial. After you do,
you can change the setting of the function by rotating the control dial.
Setting
EV Shift
White Balance
Self-timer
*
MF
Off
*
Configure the settings below in order to directly adjust focus with the control dial.
Face Detection: Off
Make-up Level: 0 (Off)
Focus Mode: MF (Manual Focus)
NOTE
• Depending on the recording mode, some functions may not be assignable to the
control dial.
Description
Brightness compensation (page 53)
Hue adjustment (page 46)
Self-timer time setting (page 45)
Focus adjustment (page 48)
No setting assigned to the control dial
100
Advanced Settings (REC MENU)