Selecting A Focus Mode; Using The Self-Timer; Specifying The Metering Mode; Specifying Flash Intensity - Casio EXILIM EX-FC300S User Manual

Selecting a Focus Mode (Focus)
Procedure
Enter the REC Mode * [MENU] * " r REC MENU" Tab * Focus
For details, see the Control Panel procedure on page 48.
Using the Self-timer (Self-timer)
Procedure
Enter the REC Mode * [MENU] * " r REC MENU" Tab * Self-timer
For details, see the Control Panel procedure on page 45.
Specifying the Metering Mode (Metering)
Procedure
Enter the REC Mode * [MENU] * " r REC MENU" Tab * Metering
For details, see the Control Panel procedure on page 56.
Specifying Flash Intensity (Flash Intensity)
Procedure
Enter the REC Mode * [MENU] * " r REC MENU" Tab *
Flash Intensity
You can specify flash intensity to one of five levels from +2 (brightest flash) to –2
(least bright flash).
• Flash intensity may not change when the subject is too far away or too close.
Controlling Image Sharpness (Sharpness)
Procedure
Enter the REC Mode * [MENU] * " r REC MENU" Tab * Sharpness
You can specify one of five sharpness settings from +2 (sharpest) to –2 (least sharp).
112
Advanced Settings (REC MENU)