Table of Contents
Advertisement
Specifying the Auto Focus Area (AF Area)
Procedure
[r] (REC) * [SET] * MENU * "REC" Tab * AF Area
Spot
U
Multi
I
Tracking
O
Spot" or
"U
Focus frame
IMPORTANT!
• Auto Focus is disabled when W (Manual Focus) is selected for the focus mode
(page 54), even if you select an AF area.
• Selecting "O Tracking" can cause vibration and noise to occur due to lens
operation while tracking a subject. This does not indicate malfunction.
• While Face Detection (page 58) is turned on, regardless of the current AF Area
setting, " U Spot" (center) focusing will be used automatically whenever a face
cannot be detected for some reason.
This mode takes readings of a small area in the center of the
image. This setting works well with focus lock (page 55).
When you half-press the shutter button while this setting selected,
the camera will select the optimum Auto Focus area from among
nine possible areas. The focus frame of the area where the
camera focuses will be displayed in green.
Half-pressing the shutter button focuses on the subject and
causes the focus frame to track the movement of the subject.
O Tracking"
"
I Multi"
"
Focus frame
57
Advanced Settings
Advertisement
Table of Contents
