Time Stamping Snapshots; Setting The Camera's Clock - Casio EXILIM EX-H50 User Manual

Time Stamping Snapshots (Timestamp)
Procedure
[SET] * MENU * "Set Up" Tab * Timestamp
You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
Example: July, 10, 2015, 1:25 p.m.
Date
Date&Time
Off
• Even if you do not stamp the date and/or time with Timestamp, you can do so later
using the DPOF function or some printing application (page 81).
• Digital zoom is disabled while time stamping is turned on.
• Time stamping is disabled when certain BEST SHOT scenes are being used.
Setting the Camera's Clock (Adjust)
Procedure
[SET] * MENU * "Set Up" Tab * Adjust
[8] [2]
[4] [6]
[0] (Movie)
When the date and time settings are what you want, press [SET] to apply them.
• You can specify a date from 2001 to 2049.
• Be sure to select your Home City (page 97) before setting the time and date. If you
set the time and date while the wrong city is selected for your Home City, the times
and dates of all of the World Time cities (page 97) will be wrong.
2015/7/10
2015/7/10 1:25pm
No stamping of date and/or time
Change the setting at the cursor location
Move the cursor between settings
Toggles between 12-hour and 24-hour format
98
Other Settings (Set Up)