Side Connections; Multi Channel Surround Receiver; Cinema Link Surround Receiver; Connect Your Computer - Philips FTR9965/69S User Manual

Hide thumbs Also See for FTR9965/69S:
Table of Contents

Advertisement

Side connections

1
2
3

Multi channel Surround receiver

CENTRE
L
AUDIO OUT
R
2
1

Cinema Link surround receiver

See the separate supplied Cinema Link instruction manual.
Note: CinemaLink via the scart to cinch adaptor is NOT possible.
Attention: the sound info on screen will not correspond with the actual sound reproduction.

Connect your computer

See the separate supplied instruction manual with your monitor.

To select connected equipment

Press the v key on the remote control repeatedly to select
or
according to where you connected your equipment at the back or the front side of your receiver.
VGA
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
Camera or Camcorder
& Connect your camera or camcorder as shown.
é Connect to
VIDEO
stereo equipment also connect
S-VHS quality with an S-VHS camcorder is obtained by connecting
the S-VHS cables with the S-video input 3 and audio inputs 1.
Do not connect cable 2 and 3 at the same time. This may cause
picture distortion !
Headphone
& Insert the plug into the headphone socket L as shown.
é Press ¬ on the remote control to switch off the internal
loudspeakers of the TV.
The headphone impedance must be between 8 and 4000 Ohm. The
headphone socket has a 3.5 mm jack.
In the Sound menu select
headphone volume.
& Connect the audio cable to the multi channel Surround receiver and
to
AUDIO OUT L
é If you want the loudspeakers of your monitor to act as centre
speaker, also connect an audiocable to the multi channel Surround
receiver and to the
of your TV receiver box 2.
" Select
Centre Input On
The loudspeakers of the monitor will now only produce centre
sound, the loudspeakers connected to the audio receiver will
produce Surround Sound.The volume has to be controlled via the
multi channel Surround receiver.
Note: No sound will be heard when a TV channel or external source is
blocked via the Child lock menu (see p. 12).
2 and
1 for mono equipment. For
AUDIO L
AUDIO R
Headphone volume
at the back of your TV receiver box 1.
and
R
SURROUND SOUND CENTRE IN
in the Source menu. See p. 9.
EXT1, EXT2, EXT3, EXT4, EXT5, FRONT
1.
to adjust the
at the back
17
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ftr9965Ftr9969s

Table of Contents