Hdmi (High Definition Multimedia Interface) Connectors; Side Connections - Philips 42PF9630A/37 User Manual

HDMI HDMI
1 2
HDMI
HDMI HDMI
FACE
CABLE / ANTENNA
1 2
HDMI
RD INTERFACE HDMI HDMI
1 2
HDMI
DVI
HDMI HDMI
RFACE
CABLE / ANTENNA
1 2
HDMI
DVI
conn us top05 hdmi -tv g.eps
1
conn us top05 hdmi.eps
3
side conn top05 - usb.eps
CABLE / ANTENNA
75
75
H Pr L
V Pb R
VIDEO Y
DIGITAL
AUDIO
IN
AV1
S-VIDEO
AV3
Pr
VIDEO
L Pb
S-VIDEO
AV2
R Y
DIGITAL
CABLE / ANTENNA
MONITOR OUT
AUDIO
L R VIDEO IR OUT
OUT
H Pr L
75
V Pb R
VIDEO Y
DIGITAL
AUDIO
IN
DIGITAL
AV1
S-VIDEO
AV3
AUDIO
Pr
VIDEO
IN
L Pb
S-VIDEO
AV2
R Y
DIGITAL
MONITOR OUT
AUDIO
L R VIDEO G-LINK
OUT
75
DIGITAL
AUDIO
IN
3
2
2
1

HDMI (High Definition Multimedia Interface) connectors

HDMI is the leading new standard for Digital video and audio interconnection.
To the connector you can connect HDMI devices such as a Set Top Box
HDMI
or compatible DVD-R or DVD player with HDMI, or DVI-equipped devices like
a computer.
So you can display high-definition pictures on this TV in the digital form.
Note: If the accessory device has DVI output only, use a DVI to HDMI adapter cable to
connect to the connector. (Then also connect the audio cable to
HDMI
.)
AUDIO IN
& Connect your HDMI device with one of the
Select the connected digital device in the Setup, Source menu, p. 16.
é
The connectors allow
HDMI IN
- the following TV and monitor display modes:
SDTV 640/720 x 480i
EDTV 640/720 x 480p
HDTV 1920 x1080i
1280 x 720p
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
Notes:
- If necessary, you can adjust the picture position to the center of the screen with the
cursor keys.
- Due to legal requirements, it is possible that with certain copy protected PCM audio
qualities from a device connected to the
signal is muted.
OUTPUT
- Your TV supports HDCP (High-bandwidth Digital Content Protection).This is a system
for protecting DVD content outputted via DVI from being copied. It provides a secure
digital link between a video source (DVD, PC, etc.) and your TV. Content is encrypted
at the source device to prevent unauthorized copies from being made.
- Proper working is only guaranteed with HDMI compliant consumer products.
- Digital devices from different manufacturers have the possibility of differing output
standards which may cause difficulties for the television to properly display.
- In case no signal is detected from your HDMI device, turn off the HDMI device and
then on again.
To get an optimal viewing, it is advised to turn your DVD player to one of the
following TV display standards: 1920x1080i, 1280x720p, 720x480i or 720x480p.

Side connections

Camera, Camcorder, Game
& Connect your camera, camcorder or game as shown.
2 and
é Connect to
VIDEO
equipment also connect
AUDIO R
S-VHS quality with an S-VHS camcorder is obtained by connecting the S-
VHS cables with the
S-VIDEO
Do not connect cable 1 and 3 at the same time. This may cause picture
distortion !
Headphone
Insert the plug into the headphone socket L as shown.
&
Press ¬ on the remote control to switch off the internal loudspeakers of
é
the TV.
The headphone impedance must be between 8 and 4000 Ohm.The headphone
socket has a 3.5 mm jack.
In the Sound menu select
volume.
connectors.
HDMI
60 Hz
60 Hz
60 Hz
input, the
HDMI DIGITAL AUDIO
3 for mono equipment. For stereo
AUDIO L
3.
input 1 and inputs 3.
AUDIO
Headphone volume to adjust the headphone
DIGITAL
33